Sadashiv Peth, Pune, Maharashtra
- GST NO. : 27ARIPS0437L1ZE
Extra-High Voltage (66-245 KV)
Leading Manufacturers, Exporters, Wholesaler, Retailer and Distributor of Dry Self-Supporting Outdoor Termination Kit, Extra High Voltage Joint Cable Joint, Extra High Voltage Outdoor Termination Joint Kit and Extra High Voltage Transmission Kit from Pune.
| Business Type | Distributor |
| Application | Industrial |
| Feature | Durable, High Performance |
| Driven Type | Electric |
| Voltage Class | 145kV |
| Standard | IEC 60071-1 1996, IEC 60071-2 1996, and IEEE-1313.1-1996 |
Preferred Buyer From
| Location | Anywhere in India |
Raychem’s dry self-supporting termination is designed for voltage class 145kV. It is free from any insulating liquid or gel. Polymeric insulated cables of various designs can be adopted with respect to shielding and metal sheath.
The polymeric housing with long creepage length is operational under severe environmental conditions according to IEC 60071-1 1996, IEC 60071-2 1996, and IEEE-1313.1-1996.
- Dry interface, no oil-filling
- Self-supporting
- Pre-fabricated and factory tested silicone-rubber stress cone
- Torque-controlled multi-contact conductor bolt
- Fast and simple installation combining GIS plug-in technology with polymeric insulators
- Isolated cable gland for sectionalisation
- Type tested according to IEC 60840
| Business Type | Distributor |
| Application | High Voltage |
| Feature | Heat Resistance, Water Proof |
| Standard | IEC60840, IEC 62067, IEEE404 & GB11017 |
| Manufactured | ISO9001 and ISO14001 |
| Voltage | Up to 245 kV |
Preferred Buyer From
| Location | Anywhere in India |
The joint is a pre-fabricated one-piece design for voltage classes up to 245 kV. Polymeric insulated cables of various designs can be adapted with respect to shielding and metal sheath. The silicone rubber joint body with integrated geometrical stress control provides proven electrical function. The joint components combine electrical performance, stress control and moisture sealing to provide the important functions required for all High Voltage products.
- Pre-moulded one piece joint body
- Proven shield continuity concept
- Factory tested silicone-rubber body
- Special silicone-rubber provides perfect compression force for optimised electrical performance
- Simple assembly
- Moulded thick outer conductive screen
- Geometrical electrical stress control by moulded conductive deflectors
| Business Type | Distributor |
| Feature | Durable, High Performance |
| Driven Type | Electric |
| Material | Polymeric |
| Voltages | Up to 245 kV |
| Standard | IEC-60840, IEC-62067, IEC-60815, IEEE-48 & IEEE-1313 |
| Voltage Type | Extra-High Voltage |
Preferred Buyer From
| Location | Anywhere in India |
| Business Type | Distributor |
| Driven Type | Electric |
| Volatge | For 72 KV, 145 KV And 245 KV |
| Type | Dry interface, no oil-filling |
| Operates in | SF6 and insulating liquids |
| Standards | IEC 60840, IEC 62067 and IEC 62271-209 standards |
Preferred Buyer From
| Location | Anywhere in India |
The dry compact switchgear termination for voltage classes up to 245 kV is designed to be installed in cable entry housings of gas-insulated switchgear (GIS). It complies with IEC 62271-209 standard, which essentially specifies the interfaces between the termination and the switchgear. Therefore the termination will fit into all GIS complying with IEC 62271-209. Adapters are available to match the dimensions of wet (oil-filled) type terminations, and older designs specified in IEC 60859. The termination operates in SF6 but also in insulating liquids like transformer oil.
- Dry interface, no oil-filling
- Dimensions comply with IEC 62271-209
- Pressure-tight resin housing
- Operates in SF6 and insulating liquids
- Pre-fabricated and factory tested Si-rubber stress cone
- Torque controlled or wedge-type multi-contact conductor bolt
- No special tools required to install the termination
- Isolated cable gland for sectionalisation
- Type tested according to IEC 60840, IEC 62067 and IEC 62271-209 standards
