Passive Fire Protection
Leading Manufacturers, Exporters, Wholesaler, Retailer and Distributor of Acoustic Acrylic Sealant, Electrical Cable Coating, Feeder Pillar Panel, Fire Rated Mortar and High Voltage Insulator Coating from Pune.
| Business Type | Distributor |
| Grade | Industrial Grade |
| Form | Liquid |
| Packaging Type | Plastic Tube |
| Surface of Application | Ceramic, Glass, Plastic |
| Fire Rating | Upto 4 hours Fire rating |
| Business Type | Distributor |
| Type | Intumescent Water Based Coating |
| Low DFT (Dry Film Thickness) | 1.6mm |
| Feature | 100% UV Stable Non-Corrosive |
| Maintenance | Zero Maintenance Required |
| Suitable | Sub-station, Cable Ducts, Transformers Bays, Switch Rooms, Marine Applications |
Details :
- Impermeable according to FM3971
- Classified for up to 90 min. Fire Rating 750C Cellulosic Fire.
- Classified for up to 90 min. Fire Rating 1100C Hydrocarbon Fire.
- Low DFT (Dry Film Thickness) of 1.6mm
- 100% UV Stable Non-Corrosive
- Non-Toxic, Non-Hazardous
- Rodent Proof Certificate (Gnawing Certificate)
- 600-700% typical Intumescent expansion after 10 minutes of exposure to 870°C
| Business Type | Distributor |
| Material | Metal |
| Application | Industrial Use |
| Weight | 10-20 Kg |
| Coating | Powder Coated |
| Height | 1000-2000 Mm |
| Temperature | 45-90 Deg C |
| Business Type | Distributor |
| Application | Making Blocks |
| Color | Grey |
| Form | Dust |
| Packaging Size | 25-50kg |
| Seals | 50mm to 100mm Thick Seals |
Details :
- Up to 4 hours with single cable and tray
- Up to 4 hours E Ratings (Integrity)
- Up to 4 hours EI Ratings (Integrity & Insulation)
- 50mm to 100mm thick seals
- Easy install with Rockwool backing
- Expands on cure to seal around cable
- No Sealants required
- Load bearing
- EN1366 tested & Approved
- CE Mark and UL
| Business Type | Distributor |
| Low DFT | 0.3 – 0.5mm |
| Product Name | CharCoat IC |
| Type | Vulcanized silicone Coating |
| Feature | 100% UV Proof |
| Voltage Type | High Voltage |
CharCoat IC is the Vulcanized silicone Coating on the market today for the protection of Insulators from pollutants :
- Protects from pollutants and contaminating layers
- Prevents dry band layers
- Prevents partial discharge and flashover
- Improved performance due to lack of pollutants
- Stops UV, ozone and ageing degradation
Properties :
- Low DFT of 0.3 – 0.5mm
- Adhesion to glass, ceramic & resins
- BS2918 – Dielectric Strength – 64kV/mm
- IEC 93 – Surface & Volume Resistivity
- IEC 60273 – Hydrophobicity
- ASTM D 495-99 – Arc Resistance
- ASTM D 2303-97 – Tracking & Erosion
- CPRI REC Spec – Hydrophobicity recovery after 100 hours Flash over Arc test
