Personal Protective Equipment
Leading Manufacturers, Exporters, Wholesaler, Retailer and Distributor of Arc Suit, Cotton Liner Gloves, Dielectric Safety Boots, Insulating Rubber Mats and Leather Over Gloves from Pune.
| Business Type | Distributor |
| Size | Free Size |
| Thickness | 3-6 Mm |
| Application | Electrical Safety |
| Gender | Unisex |
| Pattern | Plain |
| Sleeve Style | Full Sleeves |
Arc Suit is a specially designed protection garment used worldwide to effectively protect human life from electrical flash. They are made from special flame resistant fabric (FR) meeting IEC 61482-1 & IEC 61482-2 and tested as per ASTM 1959. They are classified as per HRC 1, HRC 2, HRC 3, HRC 4 based on the ATPV values as per NFPA 70 E.
Advantages:
- Inherently flame resistant FR fabric – properties retained over life span
- Lightweight fabric – Ranging from 6.5 to 9 oz/yard2 for user comfort
- Unique design – Various combinations for fatigue free operation
- Stitching thread – garments made with FR rated thread
- Various ATPV values garment starting from 5 & upto 100 cal/cm2
- Heat Attenuation factor (HAF) – more than 90% to ensure minimum exposure to heat
- For higher ATPV air ventilated design garments
| Business Type | Distributor |
| Material | Cotton |
| Application | Electric Safety |
| Color | White |
| Pattern | Plain |
| Finger Type | Full Fingered |
Elecsafe electrical insulating rubber gloves are made with highest quality rubber which gives unique benefits like:
- Tensile Strength ≥ 16MPa – Gives higher operating life
- Average elongation at break ≥ 600% – flexibility for different hand sizes
- Puncture resistance ≥ 18N/mm – Gives higher puncture resistance
- Tension set ≤ 15%- Non deforming
- Made from high quality synthetic latex rubber for better properties in less thickness
- Automated dipping process to control design variables
- Gloves voltage applications from 500V to 36kV
- Contoured design for less fatigue
- Elecsafe offers complete range of gloves in all classes and sizes
- Added benefit of resistance to acid, oil, ozone and very low temperature
- Conforms to Ageing Requirements and Flame Retardant properties
| Business Type | Distributor |
| Heat Resistant Up to | 300deg Celsius for 30 Sec. |
| Sole Tested | 35 kV upto 3 Minutes |
| Shelf Life | More Than 10 Years |
| Lining | Washable knitted nylon (seamless) |
| Insole | Moisture absorbing, machine washable |
Advantages:
Elecsafe range of dielectric shoes meets international standards as per EN 50321 ASTM standard F2413 05, ASTM F1116 F1117-08 & PPE ISO 20345-1 with DIR 89/686/EEC TOE CAP 200
- It is made with epoxy coated steel toe which can withstand 200 joules
- Specially designed rubber cleated out sole for maximum grip & slip resistance
- Oil Resistant vulcanized rubber sole for maximum grip, minimum wear & improved cut resistance
- Heat resistant up to 300deg Celsius for 30 sec.
- Complete boot tested at 20kV, 3 mins and 10 kV for 8hours
- Sole tested for 35 kV upto 3 minutes
- Shelf life – more than 10 years
- Shaft is made from yellow Polyflex dielectric compound having following durability features
- Lining – Washable knitted nylon (seamless)
- Insole – Moisture absorbing, machine washable
| Business Type | Distributor |
| Material | Rubber |
| Application | Insulating Mats |
| Feature | Anti Slip, Durable |
| Mats Available for | 415V to 36kV Voltage Applications |
| Thickness Variation From | 2-7 mm as per Voltage Applications |
| Continuous Rolls | 10m in Lengths |
High quality EPDM formulations offers low leakage current values also giving better resilience and toughness to mats against ozone, UV and general weathering.:
- Slip resistant
- Acid and oil resistant
- Hydrophobic in nature
- Fire resistant
- Halogen free flame retardant
- Mats available for 415V to 36kV voltage applications
- Higher breakdown voltage in lesser thickness
- Thickness variation from 2-7 mm as per voltage applications
- Continuous rolls of 10m in lengths
| Business Type | Distributor |
| Material | Leather |
| Length | 10-15 Inches |
| Color | Multicolor |
| Feature | Good Quality, Skin Friendly |
| Pattern | Plain |
| Pack Type | Packets |
Elecsafe electrical insulating rubber gloves are made with highest quality rubber which gives unique benefits like:
- Tensile Strength ≥ 16MPa – Gives higher operating life
- Average elongation at break ≥ 600% – flexibility for different hand sizes
- Puncture resistance ≥ 18N/mm – Gives higher puncture resistance
- Tension set ≤ 15%- Non deforming
- Made from high quality synthetic latex rubber for better properties in less thickness
- Automated dipping process to control design variables
- Gloves voltage applications from 500V to 36kV
- Contoured design for less fatigue
- Elecsafe offers complete range of gloves in all classes and sizes
- Added benefit of resistance to acid, oil, ozone and very low temperature
- Conforms to Ageing Requirements and Flame Retardant properties
- Mechanical protection against cut, abrasion & punctures
- Manufactured with top grain cow hide leather
- Provides dual benefit of dielectrical as well as mechanical resistance
